Bridge & Infrastructure
Erection, rehabilitation and specialist systems on landmark spans — over water, under live traffic, against possession windows.
Bridge and infrastructure credentials
What goes wrong on bridges — and who absorbs it
Bridge steel is unforgiving: millimetre tolerances on thousand-metre spans, lifts over water and traffic, possession windows measured in hours. A generalist learns this on your structure — we already have, on four landmark crossings.
Risk & responsibility
Erection engineering and temporary works sit inside our scope — the coordination risk does not travel back to you.
| Sector risk | How we absorb it |
|---|---|
| Possession windows measured in hours | Lifts simulated in 4D and rehearsed before the road closes; the sequence is fixed, not improvised on site. |
| Lifts over water and live traffic | In-house erection engineering and temporary works design are part of our contract. |
| Weld integrity on fracture-critical members | Approved WPS, qualified welders, NDT and independent third-party sign-off, filed in the handover dossier. |
| Access at height for specialist systems | Rope-access specialists we manage replace scaffold programmes — days instead of weeks, no lane closures. |
Bring us in for this — not for that
A good fit for
- Landmark spans and long-span crossings
- Rehabilitation and strengthening on operating bridges
- Expansion joint, bearing and damper replacement
- Erection under possession windows and live traffic
Not the right fit for
- Concrete-only substructure packages
- Road and pavement contracts with no steel scope
- Single-visit inspection or survey assignments
What we take responsibility for
Deck & steel erection
Heavy segment erection over water and live corridors — engineered lifts on 4D-simulated sequences.
Rehabilitation & strengthening
Structural repair on operating bridges, planned around traffic and possession windows.
Expansion joints & bearings
Supply and replacement of movement systems with certified partners such as Maurer.
Dampers & specialist systems
Damper, gantry and inspection systems installed at height, with rope-access specialists we manage.
Bridge packages usually run on unit price
Quantities move as surveys land, so rates are fixed and measurement stays disciplined. Turnkey still applies where the scope is fully defined at tender.
Turnkey
Risk
Nunteknik carries it
Price
Fixed, lump sum
Best for
Defined scope
Unit Price
Risk
Shared
Price
Rate × measured quantity
Best for
Moving quantities
Cost-Plus
Risk
Client-weighted
Price
Cost + fixed fee
Best for
Early-phase scope
Practical questions, direct answers
Traffic, height and weld verification — the questions bridge clients ask first.
Can you work under live traffic?
Yes — most of our bridge record was built without closing the crossing. Works are sequenced around agreed possession windows, typically at night.
How are critical welds verified?
Qualified welders work to approved welding procedures (WPS); critical welds carry NDT and independent third-party inspection (TPI) sign-off, documented in the handover dossier.
Do you supply joints, bearings and dampers?
We install and replace movement and damping systems with certified system partners such as Maurer and Doppelmayr — supply, logistics and installation under one contract.
Who engineers the erection?
Erection engineering is in-house: lift studies, temporary works and 4D sequence simulation are complete before the first segment moves.
Have a bridge package coming up?
Send the drawings or a scope outline — we respond with an erection concept and a scoped, single-point proposal.


